Cut to what ever length you want! - No returns on cut arrows.
This Renegade shaft was designed specially of those hunters that want a supremely accurate carbon arrow that is tough as nails - at a great price. The Renegade is a small diameter shaft designed to eliminate cross-wind drift perfect for those long range shots. The flight characteristics of this extremely durable shaft put a premium on kinetic energy so you can maintain maximum power down-range. When designing the Renegade our focus was affordability while maintaining the superior performance. Perfect for even the most hardcore hunter on a budget. Spine Matched Grouped Together Technology.
Black Eagle Arrows "R" Nock -Orange- 10 Grains
Stainless Steel Bone Crushing Half-Outs - 51 Grains
2" Vanes | Orange, Yellow - 18 Grains
Shipped in Renegade Box
To install the Half-Out.
Square the end of the arrow shaft
Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
Again, Rotate Half-Out until it spins perfect.
Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
Once the glued half-out is finished stand the arrow on the point to dry.
